Motorcycle Carriers with high-speed assist wheel
 are motorcycle carriers for your RV or truck 
that reduces tongue weight by 60%.


The Only Carrier designed for
5th Wheelers


The 7 X 4

Does Not Jack Knife !

$2195
with 40" wide motorcycle ramps


This carrier does not exness mt5 include the adverse effect as a bumper pull trailer which is the ability to jack-knife when backing. The carrier will always track with the tow vehicle whether while going forward or backing up. This is especially important when attached to a fifth wheel trailer. When the trailer is backed up, the carrier tracks in a straight line with the trailer. No need to remove the system to back up.

 The weight capacity is 
1000 pounds

This is sufficient for transporting the majority of the large Motorcycles on the market. The carrier incorporates a single hi-speed swivel wheel assembly with Torflex suspension. 
The deck is 8 feet long, 
7 feet wide in the front and 4 feet at the rear.

 This semi-V configuration keeps the system in your lane of travel when making turns. The front deck height is adjustable to mt5 exness download accommodate the receiver height on the tow vehicle. The deck is 3/4" treated/painted plywood with optional .063
 diamond plate.

Bike-Forward%20Wheel%20TNaaa.jpg (27462 bytes)

Class-C%20Rear%20Prof%20TNaaa.jpg (21129 bytes)

Rear%20Prof%20Above%20TNaaa.jpg (24388 bytes)

Wheel%20Traveling%20TNaaa.jpg (21895 bytes)


The 5 X 8
1000 lbs Capacity


$2195
with 40" wide motorcycle ramps


The 4 X 6
600 lbs. Capacity

$1350
plus shipping

This Motorcycle Carrier is perfect to haul your Harley, Cruiser, or any heavy cycle. A new single wheel https://www.trading-platform.com.pk/exness-mt5 trailer "type" motorcycle carrier, which works on all tow vehicles and Fifth Wheel Travel Trailers with a Class-III or Class-IV receiver hitch installed. 

System Includes

Welded Tubular Steel Frame

Torflex Torsion Suspension

Integrated Lighting System W/4-Wire Flat Trailer Plug

Tow Vehicle Interfacing Mount W/Hitch Pins (Class-III or Class-IV Receiver Hitch Required)

5.70 x 8 "D" Rated, 8-Ply, Highway Speed Trailer Tire 100 PSI. Cold

Side and Front Stake Bed Mounting Adapters

¾" Sealed/Painted Plywood Decking

Semi-Gloss Black Powder Coat Frame

 

Class-C%20Side%20TNaaa.jpg (21874 bytes)

FW%20Rear%20Prof1%20TN.jpg (28175 bytes)

FW%20Rear%20Prof%20W-Ramps%20TN.jpg (31844 bytes)

Rear%20Prof-Bike%20TNaaa.jpg (25133 bytes)

Specifications

DECK DIMENSIONS

Front Width = 7'

Rear Width = 4'

Length = 8'

 

Width = 8'
Length = 5'
 
Reduces the overall length from the original Swivelwheel-78 system by 3 feet.

 

6' Wide x 4' Long
DECKING MATERIAL 3/4" Treated/Painted Plywood 3/4" Treated/Painted Plywood 3/4" Treated/Painted Plywood
DECKING OPTIONS Polished Aluminum Diamond Plate Polished Aluminum Diamond Plate Polished Aluminum Diamond Plate
FRAME MATERIALS Welded Tubular Steel Welded Tubular Steel Welded Tubular Steel
TIE-DOWN LOCATIONS
2" x 2" Stake Receivers
(3 on Sides, 2 on Front)
2" x 2" Stake Receivers
(3 on Front & 3 on Rear)
2" x 2" Stake Receivers (2ea on the front and rear)
SUSPENSION Torsion Suspension w/Friction Plate & Pad Torsion Suspension w/Friction Plate & Pad Torsion Suspension
WHEEL & TIRE tandard: 5.70 X 8, "D" Rated, 8 Ply, Highway Speed Trailer Tire, 1075 Pound Load  @ 100 PSI tandard: 5.70 X 8, "D" Rated, 8 Ply, Highway Speed Trailer Tire, 1075 Pound Load  @ 100 PSI tandard: 5.70 X 8, "D" Rated, 8 Ply, Highway Speed Trailer Tire, 1075 Pound Load  @ 100 PSI
LOADING RAMP OPTION 3-piece Ramp System. 2 Outside Ramps = 12" Wide x 7'-5" Long w/ 750 Pound Load Rating, Center Ramp = 15" Wide x 7'-5" Long w/1500 Pound Load Rating. 3-piece Ramp System. 2 Outside Ramps = 12" Wide x 7'-5" Long w/ 750 Pound Load Rating, Center Ramp = 15" Wide x 7'-5" Long w/1500 Pound Load Rating. 3-piece Ramp System. 2 Outside Ramps = 12" Wide x 7'-5" Long w/ 750 Pound Load Rating, Center Ramp = 15" Wide x 7'-5" Long w/1500 Pound Load Rating.
TOW VEHICLE MOUNTING
  1. Single Receiver Hitch Mount utilizes a standard Class-III or Class-IV receiver on the tow vehicle.
  2. Dual Receiver Hitch Mount utilizes two individual receivers mounted to the tow vehicle for greater equalization of the deck weight to the tow vehicle.

 

  1. Single Receiver Hitch Mount utilizes a standard Class-III or Class-IV receiver on the tow vehicle.
  2. Dual Receiver Hitch Mount utilizes two individual receivers mounted to the tow vehicle for greater equalization of the deck weight to the tow vehicle.

 

Single Receiver Hitch Mount utilizes a standard Class-III or Class-IV receiver on the tow vehicle.
TOW VEHICLE COMPATABILITY
All Full Size Pick-Ups and SUV's, Class-A and Class-C Motor Coaches, Fifth Wheel Travel Trailers

 

All Full Size Pick-Ups and SUV's, Class-A and Class-C Motor Coaches, Fifth Wheel Travel Trailers

 

Vehicles with a Class-III or Class-IV receiver

 

MOTORCYCLE WHEEL CHOCK Non Locking Wheel Chock or Locking Wheel Chock Non Locking Wheel Chock or Locking Wheel Chock  
WEIGHT LIMITS 1000 Pounds 1000 Pounds 600 Pounds
DECK HEIGHT Level @ 24 3/4" Level @ 25 3/4" Level @ 25 3/4"
FLIP-UP DECK FEATURE No Yes Optional
JACK STAND LEGS WITH WHEELS Yes Yes Yes
 

 

Wheel%20Backing%20TNaaa.jpg (29317 bytes)

Side%20Bike%20TNaaa.jpg (27044 bytes)

Ramps%20TN.jpg (29047 bytes)

Automobiles & Pick-Ups
Class "A" Diesel Motor Coaches.
Class "A" Gas Motor Coaches
Class "C" Motor Coaches
Fifth Wheel Travel Trailers

Class-C%20Rear%20TNaaa.jpg (39434 bytes)

Check out our
FAQ s

Class-C%20Hitch%20TN.jpg (17052 bytes)

Check Out
The Hitch

Factory Direct
Customer Service
888 572-7959



Call    1 888 572-7959   to Order


Motorcycle Carrier
with
Hi-Speed Assist Wheel
$2040 
plus shipping

System Includes:
3-Piece Loading Ramp Set 
W/Latching Angles To Fit Trailer Rear

Two Outside Ramps = 12" Wide x 7’-5" Long @ l Load of 750 lbs each
Center Ramp = 16" Wide x &7’-5" Long @ Load of 1500 lbs


Front Support Jack Stand W/Wheel
 (Set of 2) Included

Welded Tubular Steel Frame

¾" Sealed/Painted Plywood Decking

Side and Front Stake Bed Mounting Adapters

Tow Vehicle Interfacing Mount W/Hitch Pins (Class-III or Class-IV Receiver Hitch Required)

 

Integrated Lighting System W/4-Wire Flat Trailer Plug

5.70 x 8 "D" Rated, 8-Ply, Highway Speed Trailer Tire 100 PSI. Cold

Torsion Suspension

Semi-Gloss Black Powder Coat Frame

Options

E-Track Mounting, Gray Powder Coated, Vertical Slots. (2 each @ 5’ foot long pieces)                      65.00

E-Track Mounting Track Tie Down Adapters W/D-Ring                                                                          7.50 Each

Ratchet Tie Downs W/E-Track Adapter, 1" Web, 13" Short End, 90" long End. (Set of 4)                  85.00

Spare Tire & Wheel. (Recommended)                                                                                                   75.00

V-Style Motorcycle Wheel Chock                                                                                                          69.00

Bike pro Wheel Grabber Chock                                                                                                            185.00

 

The Swivel Wheel System is shipped in three separate pieces to reduce the freight 
charges. Total weight is approx. 350 to 400 pounds. Take this into consideration when selecting a ship to address. Please indicate the shipping address to be utilized. 
The system could be held at the freight dock for pick-up if desired.

 



Motorcycle-Carriers.net
888 572-7959
Home