|
East to Install & Remove The Cruiser Ramp Motorcycle Pick-Up Bed Loader was designed to be a cost effective way to load and transport a full size motorcycle in the bed of a pick-up truck. The Cruiser Ramp system will accommodate all full size pick-ups, including the Chevrolet Avalanche and like vehicles. The loader eliminates the use of boards, and backing the pick-up into a ditch to load the motorcycle. Simply drive the motorcycles front wheel into the locking wheel chock on the system sled assembly, tie the front wheel down at the axle position using the supplied ratchet tie-down straps, activate the hand held remote switch and the motorcycle is pulled into the pick-up bed. The system is powered by a 3000 pound capacity electric winch with 3/16" wire rope heavy duty cable.
Click pictures to Enlarge The Cruiser Ramp system will accommodate the standard 5'-6", 6'-6", and 8' bed lengths with 48" clearance between the wheel wells which includes step side model pick-ups. The cruiser Ramp system allows for the tailgate of the pick-up to be closed with the motorcycle removed on the 5'-6" and 6'-6" models. The tailgate may also be closed with the 8' bed model with the motorcycle loaded or removed from the bed. The motorcycle may be loaded into a 8' bed with or without the tailgate attached. The system is easy to install and dismantle. The The Cruiser Ramp mechanism removes the motorcycle from the bed without having to pull the motorcycle out by hand. This is done without using multiple winches and complicated electronic switching. See
Additional Photos Watch the Movie 8' Beds
/ Full size pick ups System Includes: 1000-Pound Motorcycle Capacity $1895 To Order |
|
Motorcycle Factory Direct Click Picture
|
