Tubing Used In M.P.T. Series Trailers

* 2"x3"x 14 GA. TONGUE TUBING.
* 2"X2"x 14 GA. FRAME PERIMITER TUBING.
* 2"x 1 1/2" x 14 GA. AXLE TUBING.

THE M.P.T. MODEL TRAILERS ARE MADE FROM ALL 4 SIDED SQUARE AND RECTANGULAR TUBING FOR ADDED STRENGTH.

Tubing Used In U.T.B & W.F.B Series Trailers

* 2"x3"x 14 GA. TONGUE TUBING
* 2"X2"x 14 GA. FRAME PERIMITER TUBING
* 2"x 1 1/2" x 14 GA. AXLE TUBING
* 1 1/4" x 1 1/4" x 14 GA. CROSS MEMBER TUBING

THE U.T.B. MODEL TRAILERS ARE MADE FROM ALL 4 SIDED SQUARE AND RECTANGULAR TUBING FOR ADDED STRENGTH.

Tubing Used In L.T.B Series Trailers
& Model Numbers #UKCT10 / #UKCT8 / #UFB52 / #UFB64

* 2"x3"x 14 GA. TONGUE TUBING LTB1 & LTB1LP
* 3"X3" TONGUE LTB2 & LTB2XL
* 2"X3"x 14 GA. FRAME PERIMITER TUBING
* 2"x 1 1/2" x 14 GA. AXLE TUBING
* 2" X 2" x 14 GA. CROSS MEMBER TUBING

THE L.T.B. MODEL TRAILERS ARE MADE FROM ALL 4 SIDED SQUARE AND RECTANGULAR TUBING FOR ADDED STRENGTH.

THE BELOW DIAGRAM SHOWS THE DIFFERENCE BETWEEN OUR TRAILER CONSTRUCTION AND OUR COMPETITIONS TRAILER.

* OUR 4 SIDED STRUCTURAL TUBING PROVIDES THE NEEDED STRENGTH ON BOTH HORIZONTAL AND BOTH VERTICAL SURFACES OF THE TRAILER FRAME.
* HORIZONTAL STRENGTH IS NECESSARY FOR THE SIDE TO SIDE PRESSURE THAT THE TRAILER TONGUE AND GETS DURING NORMAL USE.
* VERTICAL STRENGTH IS NECESSARY FOR THE LOAD CARRYING PURPOSE OF THE
TRAILERS MAIN FRAM WORK.

* THE OTHERS 3 SIDED U CHANNEL WHEN USED ON THE TRAILER FRAME IS MISSING 1 OF THE VERTICAL SURFACES. THE VERTICAL SURFACE IS WHAT GIVES THE
TRAILER FRAME ITS STRENGTH .

* THE OTHERS 2 SIDE ANGLE CHANNEL IS MISSING BOTH 1 VERTICAL SURFACE AND 1 HORIZONTAL SURFACE, THEREFORE MAKING THE TRAILER FRAME EVEN MORE
LACKING IN STRENGTH.

* THE OTHERS UPSIDE DOWN 3 SIDED U CHANNEL WHEN USED IN THE TONGUE OR AXLE IS MISSING 1 HORIZONTAL SURFACE, THUS LEAVING IT WEAK IN SIDE TO SIDE STRENGTH.